LG LSP-W1000N User Manual download pdf (Page 33)

Client

program

Port Forwarding

Enable Port

Forwarding:

Check to enable the Port

Forwarding function.

Servers: Select the server.

Local IP

Address:

Enter the Local IP address.

Protocol: Select the protocol (TCP, UDP

or Both) used to the remote

system or service.

Public Port: Enter a public port number.

Private Port: Enter a private port number.

Description: You may key in a description

for port range.

Save: After completing the settings

on this page, click Save to

save the settings.

Reset: Click Reset to restore to

default values.

Current Port

Forwarding

Table:

Shows the current Port

Forwarding information.

Delete Selected: Click to delete selected item.

Delete All: Click to delete all listed items.

Reset: Click Reset to restore to

default values.

Note:

If you change the fort number that is registered auto-

matically from the system, you can not monitor using

the WAN

Special Application

Some software applications require special or multiple

connections to the Internet and these would normally

be blocked by the ﬁ rewall. For example Internet

Telephony or Video conferences require multiple

connections. So that these special applications can

work properly and are not blocked, the ﬁ rewall needs

to be told about them. In each instance there will be

a trigger port and incoming port(s), where trafﬁ c on

the trigger port tells the ﬁ rewall to open the incoming

ports.

Special Application allows the router to keep track of

outgoing data for speciﬁ c port numbers. The router

remembers which computer sends out what data, so

when the requested data returns through the router,

the data is sent back to the proper computer by way

of IP address and port mapping rules.

You have to ﬁ rstly check Enable before you can add/

edit an application.

Name: Enter the application name.

Incoming Type: Select the incoming application

type (TCP, UDP or BOTH)

Incoming Start

Port:

Enter a port number as the

incoming start port.

Incoming Finish

Port:

Enter a port number as the

incoming ﬁ nish port.

Trigger Type: Select the trigger type (TCP,

UDP or BOTH)

Trigger Start

Port:

Enter a port number as the

starting outbound port for the

special application deﬁ ned in

the preceding ﬁ eld.

Trigger Finish

Port:

Enter a port number as the

ending outbound port for the

special application deﬁ ned in

the preceding ﬁ eld.

Enable: Mark up to change edit mode.

Save: Press to save the new settings

on the screen.

Reset: Press to discard the data you

have entered since last time

you press Save.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Comments to this Manuals

No comments

LG LSP-W1000N User Manual Page 33

Comments to this Manuals

Related products and manuals for Supplementary music equipment LG LSP-W1000N