LG LSP-W1000N User Manual download pdf (Page 31)

31

Client

program

System

Data:

Click to show the detailed informa-

tion of the system.

Refresh

Screen:

Click to refresh all the data.

WAN Port Configuration

WAN Access Type:

Select the WAN access type

(PPPoE, PPTP and L2TP)

from the pull-down menu.

Note:

You can set the Static IP or

DHCP setting in the Setup

menu of the Netstation.

• PPPoE (PPP over Ethernet)

Most common login method.

User Name:

Enter the user name.

Password:

Enter the password.

Service Name:

Enter the service name.

Connection Type:

Select the connection type

(Continuous, Connect on

Demand and Manual) from

the pull-down menu.

Connect

If you set the Connection

Type option to manual, use

this button to connect PPPoE.

Disonnect

Use to break (hang up) the

connection.

Idle Time:

The amount of time of inactiv-

ity before disconnecting your

PPPoE session.

MTU Size:

Most ISP offers MTU

(Maximum Transmission Unit)

value to users. The most

common MTU value is 1492.

• Attain DNS

Automatically

• Set DNS Manually

Select one of these options to

set the DNS.

DNS 1-3:

Enter the DNS server IP

address(es) provided by your

ISP, or you can specify your

own preferred DNS server IP

address(es). DNS 2 and DNS

3 servers are optional. You

can enter another DNS serv-

er’s IP address as a backup.

DNS 2 and DNS 3 servers

will be used when the DNS 1

server fails.

Clone MAC

Address:

Your ISP may require a partic-

ular MAC address in order for

you to connect to the Internet.

This MAC address is the PC’s

MAC address that your ISP

had originally connected your

Internet connection to. Type

in this Clone MAC address

in this section to replace the

WAN MAC address with the

MAC address of that PC.

• Respond to WAN

Ping

• Enable UPNP

• Enable IPsec

pass through on

VPN connection

• Enable PPTP

pass through on

VPN connection

• Enable L2TP pass

through on VPN

connection

Check to enable the listed

functions.

Save:

After completing the settings

on this page, click Save to

save the settings.

Reset:

Click Reset to restore to

default values.

• PPTP (Peer-to-Peer Tunneling Protocol)

Mainly used in Europe. You need to know the

PPTP Server address as well as your name and

password.

IP Address:

Enter the IP Address.

Subnet Mask:

Enter the Subnet Mask.

Default Gateway:

Enter the service name.

Server IP Address:

Enter the Server IP Address.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comments to this Manuals

No comments