20
Display settings
Language
Select a language for the setup menu and informa-
tion display.
Dwell Time
You can set the channel sequence time to 2 seconds,
5 seconds, 10 seconds, 30 seconds or 60 seconds.
Network settings
WAN Port
l Type:
- DHCP: DHCP stands for Dynamic Host
Configuration Protocol. Network settings of this
unit are configured automatically by the DHCP
server. If you set to DHCP, the [IP Address],
[Subnet Mask] and [Gateway] options are
dimmed and these options are not set.
- Static: Enter the network settings manually.
l IP Address: Enter an IP address using the number
buttons (0-9) or Arrow (v/V/b/B) buttons.
l Subnet Mask: Enter a subnet mask address using
the number buttons (0-9) or Arrow (v/V/b/B) but-
tons.
l Gateway: Enter the gateway address using the
number buttons (0-9) or Arrow (v/V/b/B) buttons.
l DNS DHCP:
- ON: DNS settings of this unit are configured
automatically by the DHCP server.
If you set to ON, the [Main DNS] and [Sub DNS],
options are dimmed and these options are not set.
- OFF: Enter the DNS settings manually.
l Main DNS: Enter the Main DNS server address
using the number buttons (0-9) or Arrow (v/V/b/
B) buttons.
l Sub DNS: Enter the Sub DNS server address
using the number buttons (0-9) or Arrow (v/V/b/
B) buttons.
Notes:
• For more detail on WAN Port setup, ask your
network administrator and/or network service pro-
vider.
• After change the options, select [Apply] icon and
press ENTER to confirm the settings.
Comments to this Manuals