LG LSP-W1000N User Manual download pdf (Page 11)

Hookup and

Settings

Precautions

Be sure to switch off the camera before installa-

tion and connection.

Connecting cameras

Up to 4 cameras can be connected to the Netstation.

You will need to configure the camera registration

settings for cameras connected to the Netstation.

(See page 17).

Wired connection

1. Set the Camera Mode Select switch to Wired

position.

2. Connect the LAN cable as shown below.

Rear of

camera

3. Turn the Netstation and the camera power on.

The camera will be panning and tilting operation.

Notes:

• If the camera is not connected to the Netstation

with LAN cable, the panning and tilting operation

is not be activated even if the camera is powered

on condition.

• If you connect the camera to the Netstation using

the LAN cable, you should use the supplied LAN

cable or STP cable for shielding the electromag-

netic interference.

• The camera(s) is(are) will be used after configur-

ing the camera registration settings. (See page

17).

Connect the camera without wires

If you want to connect without wires, following the

next steps.

1. Set the camera mode select switch to Wireless

position.

2. Pushing the reset button to reset the camera

using a pointed object.

The camera will be panning and tilting operation.

Notes:

• The wireless function is possible after configuring

the camera registration settings for cameras con-

nected to this unit. (See page 17).

• If you use the wireless function, the Netstation

may be disconnected or its display distorted by

interference of the surrounding environment.

Connecting the Display device

Make one of the following connections, depending on

the capabilities of your existing equipment.

Video connection

When using the VIDEO OUT jacks, set the Video

Output mode select switch to VIDEO. Connect the

VIDEO OUT jacks on the rear of the Netstation to the

corresponding input jacks on the TV or monitor using

an VIDEO cable.

Note:

If the OSD is displayed too brightly, the OSD may

be shown like flickering on the monitor. In that case,

adjust the brightness of the display device.

Hookup and

Settings

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comments to this Manuals

No comments

LG LSP-W1000N User Manual Page 11

Comments to this Manuals

Related products and manuals for Supplementary music equipment LG LSP-W1000N