LG LSP-W1000N User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
Receiver Mail
l Address (1~4): Enter the receiver mail address.
You can input up to 4 E-mail addresses.
Note:
After change the options, select [Apply] icon and
press ENTER to confirm the settings.
Notification
Set the notification options.
1. Select item and press ENTER.
A checking mark appears in front of the selected
option.
2. Select [Apply] icon and press ENTER to confirm
your settings.
l Motion Detection: Sends an E-mail when motion
detection has occurred.
l USB storage Full: Sends an E-mail when the disc
has fully recorded.
l Admin PW Change: Sends an E-mail when the
administrator password has changed.
l Camera Disconnect: Sends an E-mail when a
video signal from the camera has stopped because
of a cable disconnection or malfunction of a cam-
era.
Notes:
For the E-mail sending function, the motion detection
has 1 minute term before sending an E-mail again.
Wireless
Set the Wireless options.
l Wireless
- ON: Select to enable Wireless function.
- OFF: Select to unable the Wireless function.
l SSID: You can change the SSID. Set the identifier
for the wireless network local in use. Do not use
the SSID that is the same as the other wireless
device.
l Band: Select the band (2.4GHz (G) or 2.4GHz
(B+G)).
l Channel: Select the channel.
If you use the same channel as that of the other
wireless device, this unit may not be activated
normally. In this case, change the channel.
l WEP Key: You can set the WEP key to protect a
wireless signal between this Netstation and con-
nected camera(s). The WEP key is randomly cre-
ated.
Notes:
After changing the options, select [Apply] icon and
press ENTER to confirm the settings. If the "Apply
Error" message is displayed, you should reboot
the Netstation for normal AP operation.
If you change the wireless options in the case of
the camera is not connected to the Netstation,
the camera(s) may not be activated normally.
It is
recommend to change the wireless options after
connecting the camera using the LAN cable for
safety connection.
If you connect the Netstation and the camera with
the wireless network, it may occur the interference
with the other wireless device. In that case, refer
to the owner's manual of the other wireless device
to solve the problem.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Comments to this Manuals

No comments