LG LDT5678BD Owner's Manual download pdf (Page 21)

21INSTALLATION

ENGLISH

Final Check

1

Turn on electrical power.

2

Turn on house water supply.

Error Code Possible Cause and Solution

OE Error

Drain hose kinked or pinched.

Feed the drainage and supply

hoses through the hole under

the sink. Then gradually slide the

dishwasher into the cabinet while

pulling on the hoses under the sink

to take up any slack. This helps

avoid kinking the hoses or trapping

them beneath the dishwasher.

Drain hose connected to

disposal.

Remove knockout plug on disposal.

Waste tee is clogged.

Remove knockout plug on waste

tee.

IE Error

Water supply line kinked under

dishwasher.

Feed the drainage and supply

hoses through the hole under

the sink. Then gradually slide the

dishwasher into the cabinet while

pulling on the hoses under the sink

to take up any slack. This helps

avoid kinking the hoses or trapping

them beneath the dishwasher.

House water supply not turned

on.

Turn water on.

3

4

Run the dishwasher on a Turbo cycle to verify

proper operation and check for leaks.

Make sure the door opens and closes smoothly.

If necessary, level the dishwasher again.

If the door will not close, make sure the rack

is level and all packaging materials have been

removed.

2

3

CAUTION

• Only install the lower cover provided with the

machine. Do not install cabinet baseboard as it

may cause noise and leakage.

Lower cover

Cabinet baseboard

1 ... 20 21 22 ... 57

Comments to this Manuals

No comments