LG DFB425FP User Manual download pdf (Page 21)

CAUTION

• Wipe off any spilled rinse aid to prevent suds.

NOTE

• Only use liquid rinse aid in the appliance.

• Do not overfill the rinse aid dispenser.

• Too much or too little rinse aid can inhibit the

drying performance.

Setting the Rinse Aid Level

The dispenser has five adjustment levels. The

appliance is programmed at the factory for a

rinse aid dispenser level of 2. This can be

checked and altered by using the buttons on

the control panel.

Ensure the appliance is off.

Press Power and Dual Zone

simultaneously to check the current setting.

Press Delay Start to change the rinse aid

dispenser setting. Each press of the button

changes the setting one step from L0(off) to

L4.

Once the desired rinse aid dispenser setting

is selected, press Start to save.

• The power turns off after saving.

CAUTION

• If the rinse aid lid is not closed properly, a

large amount of rinse aid will release into the

tub and cause washability problems.

NOTE

• The Rinse aid refill icon will illuminate

when more rinse aid is needed.

• If you notice cloudy spots, streaks or water

marks on the glassware after washing,

increase the setting level.

• Setting the control too high can cause

foaming, which will cause poor wash

performance.

• If the glass is smeared or foam is present on

the bottom, decrease the level setting.

• Setting the rinse aid control too low can cause

spotting and streaking on dishes and poor

drying performance.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

LG DFB425FP User Manual Page 21