20
EN
Salt Refill Cycle (1 kg for each load)
H1 H2 H3 H4
Cycles 130 50 20 10
• The table describes information of Auto
programme.
• Cycle may vary on the salt refill amount.
CAUTION
• Do not pour any detergent in the water
softener. It will cause a malfunction.
• Wipe off any spilled salt around the water
softener cap.
• Seal the cap properly by aligning it
horizontally and turning it clockwise. A loosely
fitted cap may cause the salt solution to leak
from the compartment back into the tub and
cause corrosion.
• After refilling the dishwasher salt, a wash
programme should be operated without
dishes, as any spilled salt inside the appliance
may cause rust or damage to the appliance if
the left unwashed.
NOTE
• The salt can be purchased from salt
distributors.
Adding Rinse Aid
The Rinse Aid indicator appears in the display
when more rinse aid is needed.
The use of rinse aid is recommended to prevent
water spots on dishes and to enhance drying
performance.
1
Open the rinse aid lid by lifting up the flap.
2
Add a liquid rinse aid to the maximum fill
level. The rinse aid should be settled in the
dispenser while filling, or air bubbles may
result in poor drying performance. Avoid
overfilling the dispenser.
3
Close the lid to lock the dispenser. Rinse
aid is dispensed automatically during the
final rinse cycle.
Comments to this Manuals