LG WTP20WX User Manual download pdf (Page 19)

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc. under

the feet). Make sure that all four feet are stable

and resting on the floor and then check that the

appliance is perfectly level (Use a spirit level).

• Once the appliance is level, tighten the lock

nuts up towards the base of the appliance. All

lock nuts must be tightened.

Raise Lower

Lock nut

Tighten all 4

lock nuts securely

Diagonal Check

• When pushing down on the edges of the top

plate diagonally, the appliance should not move

up and down at all (check both directions). If

the appliance rocks when pushing the machine

top plate diagonally, adjust the necessary foot

or feet again.

WARNING

• After stacking the Main Washer on to the Mini

Washer, use the leveling feet on Mini Washer

to level both. Main Washer´s leveling feet

should be already be firmly snug against the

Mini Washer and the locknuts turned counter-

clockwise to secure them.

NOTE

• Timber or suspended type flooring will

contribute to excessive vibration and

unbalance. Re enforcement or bracing of the

timber floor may need to be considered to stop

or reduce excessive noise and vibration.

Using Anti-Slip Sheets (Optional)

If you install the appliance on a slippery surface,

it may move because of excessive vibration.

Incorrect leveling may cause malfunction

through noise and vibration. If this occurs, install

the anti-slip sheets under the leveling feet and

adjust the level.

Clean the floor to attach the anti-slip sheets.

• Use a dry rag to remove and clean foreign

objects and moisture. If moisture remains,

the anti-slip sheets may slip.

Adjust the level after placing the appliance in

the installation area.

Place the adhesive side of the anti-slip

sheets on the floor.

• It is most effective to install the anti-slip

sheets under the front feet. If it is difficult to

place the pads under the front feet, place

them under the back feet.

This side up

Adhesive side

Ensure the appliance is level.

• Push or rock the top edges of the

appliance gently to make sure that the

appliance does not rock. If the appliance

rocks, level the appliance again.

NOTE

• You can obtain anti-slip sheets from an LG

Service Centre or a Hardware store.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

Comments to this Manuals

No comments

LG WTP20WX User Manual Page 19

Comments to this Manuals

Related products and manuals for Washing machines LG WTP20WX