LG WTP20WX User Manual download pdf (Page 18)

17

EN

Installing the Drain Hose

• The drain hose should not be placed higher

than 100 cm above the floor. Water in the

appliance may not drain or may drain slowly.

1

Insert the band clamp onto the drain hose

elbow. Pliers may be required to open the

clamp so it can be fitted to the rubber end of

the hose.

Band clamp

2

With the hose leading up from the elbow,

firmly insert the elbow onto the drain outlet

on the back of Mini Washer.

3

Adjust the band clamp with pliers to keep the

hose securely in place and prevent leaking.

Band clamp

Using the Drain Hose Connector

1

Connect the drain hose of Main Washer and

Mini Washer to the drain connector.

2

Insert the included band clamps on to the

ends of the two drain hoses.

3

Push the drain hoses firmly onto the drain

connector.

Drain hose

connector

CAUTION

• Adjust the band clamps to prevent the hoses

from coming loose or leaking. Failure to do

so could result in flooding. Use of the drain

connector helps avoid siphoning, odors, or

improper draining.

• Make sure the drain hose is not kinked or

pinched. This is a potential cause of drainage

problems or noise.

NOTE

• Depending on the installation environment, you

may have to purchase a separate drain hose

connector. The connector supplied will suit a

standard laundry drum side drain hole.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 48 49

Comments to this Manuals

No comments