LG WTP20WX User Manual download pdf (Page 16)

Connecting the Supply Hose

• Water supply pressure must be between 0.1

MPa and 0.8 MPa (100 ~ 800kPa).

• Do not overtighten the water supply hose.

• If the water supply pressure is more than

0.8 MPa, a decompression device should be

installed.

• Periodically check the condition of the hose

and replace the hose if necessary.

• Contact the service centre if there is no rubber

seal fitted to the hose ends.

Checking the Rubber Seal on the

Supply Hose

Two rubber seals are supplied with the water

supply hoses. They are used for preventing

water leaks. Make sure the connection to taps is

sufficiently tight. Do not use mechanical devices

such as multi grips to tighten the inlet hoses.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the hose connector onto the water supply

tap.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 48 49

No comments

LG WTP20WX User Manual Page 16