LG CT24.NP2 User Manual download pdf (Page 12)

12

ENGLISH

THE INDOOR UNIT INSTALLATION

Precautions when laying power

wiring

Use round pressure terminals for connections

to the power terminal block.

When none are available, follow the instruc-

tions below.

- Do not connect wiring of different thickness-

es to the power terminal block. (Slack in the

power wiring may cause abnormal heat.)

- When connecting wiring which is the same

thickness, do as shown in the figure below.

CAUTION

The connecting cable connected to the

indoor and outdoor unit should be com-

plied with the following specifications

(This equipment shall be provided with a

cord set complying with the national regu-

lation).

!

CAUTION

The Power cord connected to the unit

should be selected according to the fol-

lowing specifications.

!

If the supply cord is damaged, it must be

replaced by a special cord or assembly

available from the manufacturer of its

service agent.

NORMAL

CROSS-SECTIONAL

AREA 0.75mm

2

20mm

35±5mm

GN/YL

10±3mm

Power wirer

Round pressure terminal

Connect same thickness

wiring to both sides.

It is forbidden to

connect two to one

side.

It is forbidden to

connect wiring of

different thicknesses.

- For wiring, use the designated power wire

and connect firmly, then secure to prevent

outside pressure being exerted on the termi-

nal block.

- Use an appropriate screwdriver for tightening

the terinal screws. A screwdriver with a

small head will strip the head and make prop-

er tighterning impossible.

- Over-tightening the terminal screws may

break them.

1,MFL67855506,영영,10영영(영영영) 2017. 6. 27. 영영 6:13 Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Comments to this Manuals

No comments