LG LT303PI-B User Manual download pdf (Page 5)

Introduction

About Dome Camera

The dome cameras are designed for installation in an

indoor or outdoor video surveillance system.

The camera incorporates the digital signal processor,

pan/tilt mechanism, x27 zoom lens and RS-485 com-

munication interface in a compact outdoor enclosure.

Features

High Sensitivity Support

The camera provides the high quality picture with

4.5 mm EX-view HAD CCD.

Preset Position

Preset position is the function to register camera

monitoring positions (preset positions). By using

LKD1000 controller, you can register presets with

position number. Maximum 128 Preset Position

are available. By entering the position numbers,

you can move cameras to the preset positions.

The moving speed and holding time are adjust-

able.

Preset Tour

Preset Tour is the function to go through all the

registered camera monitoring positions (preset

positions).

Preset Group Tour

A preset tour is composed of a group of preset

positions that the operator can program to be

linked together in a sequence. A preset group

should have a maximum of 8 preset positions.

Pattern recording function

A routine of manual operations can be stored and

reproduced repeatedly. The Pan, Tilt and Zoom

controls are available for pattern recording.

Note:

The available total time of pattern differs depend-

ing on camera’s operation. When the pattern

recording is full, the pattern recording will auto-

matically stop.

Privacy Mask

Privacy zone feature enables users to veil unwant-

ed zones. This setting is used for masking unwant-

ed zones, hiding them from display on the monitor

screen. Up to 8 zones can be registered.

Auto Pan

The camera has an Auto Pan function that enables

to keep surveillance on every detail occurring

around the specific area, which is preset to watch

in advance.

The camera can pan among the maximum 8

points you will set. The moving speed and holding

time are adjustable.

Auto Flip

When the camera is operated to tilt through the

90°, it can be watched the opposite side of the

locations by Auto Flip of a 180° horizontally.

Optical Zoom

The optical zoom range is 1x to 27x.

Digital Zoom

Digital zoom enhances the systems zoom range

to 12 times beyond the 27x optical zoom limit. By

utilizing the digital zoom function, the total system

zoom range increases further from 27x (1x digital

zoom) to 324x (12x digital zoom)

Sensor Linkage

The camera is capable of capturing a subject by

the focus of camera moving promptly toward the

subject at the rate of 120°/s when the camera

works with a detector (magnetic, beam, infrared

rays), and a subject moving within a detection area

is captured by a detector.

Alarm In function

Alarm input signals are supplied from external

devices through the ALARM IN connector to acti-

vate 'go to preset' function.

Controls by General Controller

This camera can be controlled by RS-485.

Especially the camera has an excellent cost-sav-

ing effect because it can be controlled by the gen-

eral RX point of contact signal.

Connects with the maximum 256 cameras

This camera can be utilized after being connected

with maximum 256 cameras.

Therefore, it is capable of performing an excellent

job in the large buildings or department stores.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

LG LT303PI-B User Manual Page 5

Comments to this Manuals

Related products and manuals for Security cameras LG LT303PI-B