3. Press [Cam OSD] button to display the camera
setup menu.
At this point, you have access to the camera setup
menu.
General Operation
1. Use [In] or [Out] button to select an option then
press [Open] or [Close] button.
Submenu appears on the monitor.
2. Use
[In] or [Out] button to select a submenu
option.
3. Use
[Near] or [Far] button to select a value.
4. Select [EXIT] option then press
[Open] or [Close]
to exit the setup menu. In the submenu, use [In] or
[Out] button to select the [EXIT] then use [Near]
or [Far] button to select a mode and press [Open]
or [Close] to exit the setup menu.
RET: Return to the previous.
TOP: Return to the CAMERA SETTING menu
screen.
END: Exit the setup menu.
Focus setting
Focus Mode setting
The camera adjusts the focus automatically by sens-
ing the center of the picture.
Select [FOCUS MODE] option on the [FOCUS] menu,
then select the following mode.
AUTO: Auto-focus is activated automatically.
ONE PUSH: The focus is activated manually. If the
camera is received auto-focus command, the cam-
era is activated Auto-focus mode and the focus is
set automatically and then the focus mode is auto-
matically changed to manual mode.
ZOOM TRIG: The focus is activated manually.
If you change the zoom, the focus is activated
Automatically and then the focus mode is auto-
matically changed to manual mode.
MANUAL: Focus is activated only when the
FOCUS (NEAR or FAR) keys on the controller is
pressed.
•
•
•
•
•
•
•
Comments to this Manuals