LG 43LF631V User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 172
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
ENGLISH
17
Precautions to take when using the
magic remote
•  Use the remote control within the specied range (within 10 m).
You may experience communication failures when using the device
outside the coverage area or if there are obstacles within the
coverage area.
•  You may experience communication failures depending on the
accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may
cause communication failures.
•  The Magic Remote may not work properly if a wireless router (AP)
is within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
•  Do not disassemble or heat the battery.
•  Do not drop the battery. Avoid extreme shocks to the battery.
•  Inserting the battery in the wrong way may result in explosion.
Licenses
Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.
(Only LF59**) (Only LF63**, LF64**, LF65**)
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
[email protected]om. This oer is valid for three (3) years from the date
on which you purchased the product.
Troubleshooting
Cannot control the TV with the remote control.
•  Check the remote control sensor on the product and try again.
•  Check if there is any obstacle between the product and the remote
control.
•  Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
•  Check if the product is turned on.
•  Check if the power cord is connected to a wall outlet.
•  Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
•  Check the power control settings. The power supply may be
interrupted.
•  Check if the Automatic Standby(Depending on model) / Sleep
Timer / Timer Power Off is activated in the TIMERS settings.
•  If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format is
displayed.
•  Turn the TV o/on using the remote control.
•  Reconnect the HDMI cable.
•  Restart the PC with the TV on.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 171 172

Comments to this Manuals

No comments