LG SK8 User Manual download pdf (Page 2)

Front Panel

LED indicator

The buttons are located on the side.

1 (Standby) ··········Switches the unit ON or OFF.

F (Function) ························Selects function

p/o (Volume)·····················Adjusts volume

··························Selects Wi-Fi function.

LED indicator : Shows connection status.

• White (Blinking): Waiting for network connection

on Wi-Fi function

• White (Staying on): Network connection is

completed on Wi-Fi function or the other functions

are selected

• White (Dimmed): Standby mode with network

connection.

• Red (Staying on): Standby mode without network

connection.

Rear Panel

DC IN································AC adapter input

OPTICAL IN ············Connect to an optical device.

PORTABLE IN···············Connect portable device.

USB (Service only) ········S/W download connector.

LAN ································Connect to router.

HDMI OUT (TV ARC)··············· Connect to a TV.

HDMI IN ··········Connect to device with HDMI OUT.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and

follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar.

c The sound bar and wireless subwoofer will be

automatically connected. The subwoofer's green

LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to

connect manually.

a Press Pairing button on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless

subwoofer blinks quickly.

(If the green LED does not blink, press and

hold the Pairing button.)

b Turn on the sound bar.

c Pairing is completed.

• The green LED on the rear of the wireless

subwoofer turns on.

Keep the sound bar and the subwoofer

away from the device (ex. wireless router,

microwave oven, etc.) over 1 m to prevent

wireless interference.

1 m

TV Connection

Connect the sound bar and TV using Optical ( ) or

HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV

does not support HDMI ARC.

• If this unit is connected by OPTICAL and

ARC at the same time, the ARC signal is

a high priority.

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box,

Player etc.)

b Set the input source by pressing F on the remote

control or unit repeatedly.

Network Connection

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home

network.

c Connect the sound bar to the power supply.

All devices should be connected to same router.

Download LG Wi-Fi Speaker Application

Download “LG Wi-Fi Speaker” on the App Store or

Google Play Store.

LG Wi-Fi Speaker

Launch LG Wi-Fi Speaker App

Follow the steps for wired or wireless connection

displayed on the screen.

Remote control

Replacement of Battery

SOUND EFFECT: Selects a sound effect mode.

: Adjusts sound level of each speaker.

AV SYNC: Synchronizes the audio and video.

J: Displays the input source information.

AUTO VOL: Adjusts too loud or low output volume

level appropriately.

AUTO POWER: Automatically turns on by an input

source.

Additional Information

Specication

Power

consumption

Refer to the main label.

Networked standby : 5.2 W

(If all network ports are

activated.)

AC adapter

• Model : DA-38A25

• Manufacturer : Asian Power

Devices Inc.

• Input :

100 - 240 V ~ 50 - 60 Hz

• Output : 25 V 0 1.52 A

Dimensions

(W x H x D)

Approx.

1061.0 mm x 57.5 mm x 87.0 mm

Amplier

(Total RMS

Output

power)

360 W RMS

Design and specications are subject to change

without notice.

OPEN SOURCE SOFTWARE NOTICE

INFORMATION

To obtain the source code under GPL, LGPL, MPL, and

other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to

you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of

media, shipping, and handling) upon email request to

opensourc[email protected].

This offer is valid for a period of three years after our

last shipment of this product. This offer is valid to

anyone in receipt of this information.

How to disconnect the wireless network

connection or the wireless device

Press and hold “ ” button until you hear the beep

sound once.

POWER: This unit operates on a mains supply of

100 - 240 V ~ 50 - 60 Hz.

Wiring: This unit is supplied with a BS 1363 approved main

plug. When replacing the fuse, always use of the same rating

approved to BS 1362. Never use this plug with the fuse

cover omitted. To obtain a replacement fuse cover contact

your dealer. If the type of plug supplied is not suitable for

the mains sockets in your home, then the plug should be

removed and a suitable type tted. Please refer to the wiring

instructions below:

Warning: A mains plug removed from the mains lead of

this unit must be destroyed. A mains plug with bared wires

is hazardous if inserted in a mains socket. Do not connect

either wire to the earth pin, marked with the letter E or with

the earth symbol

6 or coloured green or green and yellow.

If any other plug is tted, use same rating of fuse in the plug.

Important: The wires in this mains lead are coloured in

accordance with the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the

wires in the mains lead of this unit may not correspond with

the coloured marking identifying the terminals in your plug,

proceed as follows: The wire which is coloured blue must be

connected to the terminal which is marked with the letter N

or coloured black. The wire which is coloured brown must be

connected to the terminal which is marked with the letter L

or coloured red.

SK8.DGBRLLK_SIMPLE (Sheet)_V2_ENG_MFL70460155.indd 5-8 2018-04-04  3:20:52

1 2

LG Wi-Fi 1
Sound Bar 1

Comments to this Manuals

No comments

LG SK8 User Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown LG SK8