LG M4630CCBA User Manual download pdf (Page 46)

Controlling Multiple Products

RS-232C

A12

Transmission / Receiving Protocol

25. Tile Mode (Command 1: d, Command 2: d)

► Change a Tile Mode.

Transmission Acknowledgement

Data (Hex)

[d][d][ ][Set ID][ ][Data][Cr] [d][ ][Set ID][ ][OK/NG][Data][x]

26. Tile mode check (Command 1: i, Command 2: a)

► Check the tile mode.

Transmission Acknowledgement

The data is always FF (in Hexa)

[i][a][ ][Set ID][ ][Data][Cr] [a][ ][Set ID][ ][OK/NG][Data][x]

27. H Size (Command 1: d, Command 2: g)

► To set the Horizontal position.

Transmission Acknowledgement

Data Min : 00H to Max : 14H (*transmit by Hexadecimal code)

If the H tile is set to 1, it does not work.

[d][g][ ][Set ID][ ][Data][Cr] [g][ ][Set ID][ ][OK/NG][Data][x]

28. V Size (Command 1: d, Command 2: h)

► To set the Vertical position.

Transmission Acknowledgement

Data Min : 00H to Max : 14H (*transmit by Hexadecimal code)

If the V tile is set to 1, it does not work.

[d][h][ ][Set ID][ ][Data][Cr] [h][ ][Set ID][ ][OK/NG][Data][x]

Data IR Remote Key

00, 11 Tile mode is off.

12 1 x 2 mode

13 1 x 3 mode

… …

FF 15 x 15 mode

ex) Data 13 : Indicates that the H Tile is 1 and the V Tile is 3.

Except for 00, a value 0X or X0 cannot be used.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

No comments

LG M4630CCBA User Manual Page 46