
LSW600BOWNER’S MANUALEZ SLIM WALL MOUNTP/NO : MFL63640525 (1207-REV00)Please read this manual carefully before installation and retain it for future r
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need servi
2Accessories Wall mount screw8 unitsWall mount anchor 8 unitsGuide spacer 4 unitsGuide space screw 4 units (M8X25 mm)Set protectioncushion 4 unitsSa
ENGLISH3Do not install the product where the weight cannot be supported. If the strength of the location where the wall mount is installed is not stro
4Installation method- Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4 mm drill bit for wood or steel / Level / Stud
5ENGLISH2abdec- If the screw will not fully tighten when using a guide spacer, recheck the assembly depth of the screw and refer to the technical ser
65How to level the DisplayAfter installing the display, check to make sure it is level.The wall mount has two screws that make minor adjustments to th
7ENGLISHHow to level the Display6Tilt Angle Adjustment- The tilt angle can be adjusted after installation and setup.- When you adjust the angle, hold
87How to adjust height+ 80 mm + 80 mm- 80 mm- 80 mmClamping bolt<When moving the set downward> <When moving the set upward>→ It is possibl
9ENGLISH→ It is possible to move the set upward and downward by as much as 80 mm.→ Please use both hands when adjusting the set upward and downward.
Comments to this Manuals