LG WAW33RW2RP User Manual download pdf (Page 26)

When and how to replace a filter

How to replace a Filter

Close the tap water valve.

Pull and remove the water container, lift the lever, and then remove the filter cover.







Notice

• Activated Carbon in the filter can flow into the tank.

- This minute activated carbon powder, which is designed to improve the taste

of water, comes out from the Post-carbon filter, and it is not harmful to the

human body.

• Drain the water and wipe with dry cloth.

•

This water purifier uses the RO water purifying system, which uses drain

water (wastewater) for making purified water(pure water).

- The recovery ratio is 20 ~ 35 %.

(With 100 ml of source water, the water purifier can make 20 ~ 35 ml pure

water after purifying)

It depends on the water condition (pressure, temperature, property).

Open

• The filter must be replaced after being washed. (Flushing)

- Out sediment, sediment, Pre-carbon, RO membrane, and Post-carbon filter

need to be washed with Sediment-filtered tap water for 10 minutes.

Afterward, assemble them.

• In case replacement is done without washing the filter

- Black-colored water may come out due to the activated carbon powder or initial

activated carbon.

- Since it is impossible to check if the filter is clogged, this may cause breakdown.

CAUTION

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

No comments

LG WAW33RW2RP User Manual Page 26