LG V280 User Manual download pdf (Page 18)

Before Operation-DVD part

AUDIO

Each DVD disc has a variety of audio output options.

Set this unit’s AUDIO options according to the type of

audio system you use.

Dolby Digital / DTS / MPEG

Bitstream: Select “Bitstream” if you connect the

DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifi-

er or other equipment with a Dolby Digital, DTS or

MPEG decoder.

PCM (for Dolby Digital / MPEG): Select when con-

nected to a two-channel digital stereo amplifier.

DVDs encoded in Dolby Digital or MPEG will be

automatically downmixed to two-channel PCM audio.

Off (for DTS): If you select “Off”, the DTS signal is

not output through the DIGITAL AUDIO OUT jack.

Sample Freq. (Frequency)

If your receiver or amplifier is NOT capable of handling

96 kHz signals, select 48 kHz. When this choice is

made, this unit automatically converts any 96 kHz sig-

nals to 48 kHz so your system can decode them.

If your receiver or amplifier is capable of handling 96

kHz signals, select 96 kHz. When this choice is made,

this unit passes each type of signal through without any

further processing.

Check the documentation for your amplifier to verify its

capabilities.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). This allows you to listen to a

movie at a lower volume without losing clarity of sound.

Set DRC to On for this effect.

Vocal

Set to On only when a multi-channel karaoke DVD is

playing. The karaoke channels on the disc mix into nor-

mal stereo sound.

LOCK (Parental Control)

Rating

Blocks playback of rated DVDs based on their content.

Not all discs are rated.

1. Select “Rating” on the LOCK menu then press B.

2. To access the LOCK options, you must input the

password you have created. If you have not yet

entered password, you are prompted to do so.

Input a password and press ENTER/OK. Enter it

again and press ENTER/OK to verify. If you make a

mistake before pressing ENTER/OK, press CLEAR.

3. Select a rating from 1 to 8 using the v / V buttons.

Rating 1-8: Rating one (1) has the most restrictions

and rating eight (8) is the least restrictive.

Unlock: If you select unlock, parental control is not

active and the disc plays in full.

4. Press ENTER/OK to confirm your rating selection,

then press SETUP to exit the menu.

Password

You can enter or change password.

1. Select Password on the LOCK menu then press B.

2. Follow step 2 as shown above (Rating).

To change the password, press ENTER/OK when the

“Change” option is highlighted. Input a password and

press ENTER/OK. Enter it again and press

ENTER/OK to verify.

3. Press SETUP to exit the menu.

If you forget your password

If you forget your password, you can clear it using the

following steps:

1. Press SETUP to display the Setup menu.

2. Input the 6-digit number “210499” and press

ENTER/OK. The password is cleared.

DVD

DivXDVD

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

LG V280 User Manual Page 18

Comments to this Manuals

Related products and manuals for DVD players LG V280