LG WF-T556 User Manual download pdf (Page 7)

10cm

CAUTION

nstallation

Introduction

Install the washing machine on a flat and firm surface.

Level the washing machine

●

Install the washing machine on a level and firm surface.

●

Keep the washing machine more than 10cm from the wall to prevent vibration noise during spinning.

●

The base opening must not be obstructed by carpeting when the washing

machine is installed on a carpeted floor.

●

Wooden floors may need reinforcing to prevent the normal vibration which

occurs with an unbalanced load.

❏

Check the level of the washing machine using a

spirit level on the side of the washing cabinet

❏

You can check the level also by visually lining up the

washer with the fills, adjacent walls or cabinets.

❏

You can level the washer using the A.L spindle fitted to the cabinet.

●

Screw the A.L SPINDLE legs up or down as required.

●

Additional height adjustment plates are provided in the accessory bag. These fit under A.L SPINDLE

if required to allow for greater adjustment of the legs.

●

When washing machine does not even out, turn A.L SPINDLE

right or left to be level.

●

Should the height adjustment exceed the maximum

allowed by the A.L SPINDLE, place height

adjustment plats provided under

the legs as shown in the

diagram.

●

If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,

spin failure or

” error can happen to it.

It must be placed on a firm and level floor to prevent spin failure.

●

If the appliance is supplied from a cord extension set or electrical portable outlet

device the core extension set or electrical portable outlet device should be

positioned so it is not subject to splashing or ingress of moisture.

A.L SPINDLE

DOWN

1 plate used 2 plates used 3 plates used 4 plates used

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments

LG WF-T556 User Manual Page 7

Comments to this Manuals

Related products and manuals for Washing machines LG WF-T556