LG WD1357RD User Manual download pdf (Page 24)

24

ow to use washer

H

Add Load

Use this function to add loads or remove the

foreign material.

• How to use “Add Load”

- Press the “Add Load” button.

- Close the door after add loads or remove

the foreign material(e.g. coin or pin etc.)

- Press the “Start/Pause” button.

• Open the door when “Door Lock” is off after

checking the safety.

• Results when choosing “Add Load” during

cycles

- When the tub is spinning: Tub stops and

“Door Lock” is off.

- When water temperature in the tub is

higher than 45°C: “Add Load” is not

available with short warning sound for

safety.

- When lots of water is in the tub: “Door

Lock” is off after draining by safe water

level.

• “Add Load” doesn’t work when “Tub

Cleaning” course is in progress for safety

Time Delay

Preparing washing before starting “Time Delay”

- Turn on the water tap.

- Load laundry and close the door.

- Place the detergent and fabric softener in

the drawer.

• How to set “Time Delay”

- Press Power( ) button.

- Turn the Program dial to select

the program you require.

- Press Time Delay button and set the

desired time.

- Press the Start/Pause( ) button.

• If Time Delay button is pressed, “3:00” is

displayed. The maximum delayed time is

19:00 hours and the minimum time is 3:00

hours.

• Each pressing of the button advances time

delay by one hour.

• To cancel the time delay, press the

Power( ) button.

• Time Delay is ‘expected time’ from the

present to the completion of washing cycle

or selected process (Wash, Rinse, Spin).

• According to the condition of water supply and

temperature, the delayed time and the actual

washing time may vary.

NOTE

Put the laundry into the tub completely.

Laundry caught in between door closing

part can damage door packing(rubber

part) and might cause failure.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Comments to this Manuals

No comments