LG WD-1252RD7 User Manual download pdf (Page 13)

nstallation



Level adjustment

1. Adjusting the washing machine level properly prevents excessive

noise and vibration.

Install the appliance on a solid and level floor surface, preferably in

a corner of the room.

2. If the floor is uneven, adjust the adjustable feet as required. (do

not insert pieces of wood etc. under the feet)

Make sure that all four feet are stable and resting on the floor and

then check that the appliance is perfectly level. (use a spirit level)

※※

After the washer is level, tighten the lock nuts up towards of the base of

the washer. All lock nuts must be tightened.

❊ Diagonal Check

When pushing down the edges of the washing machine top plate diagonally, the

machine should not move up and down at all. (Please, check both of two directions)

If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

NOTE

Timber or suspended type flooring may contribute to

excessive vibration and unblance errors.

NOTE

In the case that the washing machine is installed on a raised

platform, it must be securely fastened in order

to eliminate the risk that it might fall off.

Adjustable

feet

Adjustable

feet

 In case of auto leveling foot

The right rear foot of the washing machine is an auto leveling foot.

Unlike with the adjustable feet, adjusting the auto leveling foot bolt

may cause noise or vibration.

❊ Check the auto leveling foot’s state

Case1. Floating from floor

• Raising the front left adjustable foot will press the

auto leveling foot to the floor.

Case2. Auto leveling foot fully pressed

• Raising the adjustable feet at the right front and left

back corners will release the auto leveling foot.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

LG WD-1252RD7 User Manual Page 13