LG T2111DSAM User Manual download pdf (Page 12)

12

EN

Connecting the Supply Hose

• Before connecting the water supply hose to

the water tap, check the hose type and then

choose the correct instruction.

• The water supply hose supplied may vary from

country to country. Make sure to connect the

blue supply hose to the COLD water tap, and

the orange supply hose to the HOT water tap.

• Water supply pressure must be between 30

kPa and 800 kPa (0.3 - 8.0 kgf / cm²).

• Do not strip or crossthread when connecting

supply hoses to the valve.

• If the water supply pressure is more than

800 kPa, a decompression device should be

installed.

• Periodically check the condition of the hose

and replace the hose if necessary.

Checking the Rubber Seal on the

Supply Hose

Two rubber seals are supplied with the water

supply hoses. They are used for preventing

water leaks. Make sure the connection to taps is

sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the hose connector onto the water supply

tap.

Connecting One Touch Type Hose to

Tap Without Thread

1

Loose the four fixing screws.

Upper

connector

Rubber

seal

Fixing screw

2

Remove the guide plate if the tap is too large

to fit the adapter.

Guide plate

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments