LG PH1 User Manual download pdf (Page 13)

Operating 13

Operating

2

Listening to music stored on the

BLUETOOTH devices

Pairing your unit and BLUETOOTH

device

Before you start the pairing procedure, make sure the

Bluetooth feature is turned on in to your Bluetooth

device. Refer to your Bluetooth device’s user guide.

Once a pairing operation is performed, it does not

need to be performed again.

1. Turn on the unit then

j

LED blinks with the

sound.

2. Operate the Bluetooth device and perform the

pairing operation. When searching for this unit

with the Bluetooth device, a list of the devices

found may appear in the Bluetooth device display

depending on the type of Bluetooth device. Your

unit appears as “LG PH1 (xx)”.

3. Select “LG PH1 (xx)”.

y

XX means the last two digits of

Bluetooth address. For example, if your

unit has a Bluetooth address such as

9C:02:98:4A:F7:08, you will see “LG PH1

(08)” on your Bluetooth device.

y

Depending on the Bluetooth device type,

some device have a different pairing way.

Enter the PIN code (0000) as needed.

,

Note

4. When this unit is successfully connected with

your Bluetooth device,

j

LED will turn on with

the sound.

5. Listen to music.

To play a music stored on your Bluetooth device,

refer to your Bluetooth device’s user guide.

y

When using Bluetooth technology, you have

to make a connection between the unit and

the Bluetooth device as close as possible and

keep the distance.

However you may experience issues in the

cases below :

- There is an obstacle between the unit and

the Bluetooth device.

- There is a device using same frequency

with Bluetooth technology such as a

medical equipment, a microwave or a

wireless LAN device.

y

You should connect your Bluetooth device to

this unit again when you restart it.

y

The sound may be interrupted when the

connection interfered by the other electronic

wave.

y

You may not control the Bluetooth device

with this unit.

y

Pairing is limited one Bluetooth device per

one unit and multi-pairing is not supported.

y

Depending on the type of the device, you may

not be able to use the Bluetooth function.

y

You can enjoy Bluetooth function using

Smart phone, MP3 player, etc..

y

The more distance between the unit and the

Bluetooth device, the lower the sound quality

becomes.

y

Bluetooth connection will be disconnected

when the unit is turned off or the Bluetooth

device gets too far from the unit.

y

When Bluetooth connection is disconnected,

connect the Bluetooth device to the unit

again.

y

When you connect Bluetooth device (iOS

device etc.) to this unit or operate the device,

the volume level can be synchronized with

each other.

y

When the unit is not connected, Bluetooth

LED will blink.

y

Bluetooth connection using the TV, PC or

dongle is not supported.

,

Note

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments