LG LSW140B User Manual download pdf (Page 4)

Separating the TV bracket

1. After expanding the wall mount forward as shown in Fig. 1, separate the safety pin from the wall mount as

shown in Fig. 2.

2. Separate the set bracket as shown in Fig. 3.

Installation method

- Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4 mm drill bit for wood or steel / Level /

Stud finder / Drill. You may also need an 8 mm socket wrench or an Ø8 mm drill bit for concrete.

Attaching the mounting bracket on the TV

Make sure the screws are fully tightened to the bracket and display. If the screws will not fully tightened, they

might be too long or the wrong size.

1. Check to see if the display has screws already installed into the VESA mounting holes. If so, remove those.

2. Attach the bracket to the back of the display as shown above. Use a Phillips head "+" screwdriver to tighten the

screws.

- At this time, be careful to prevent the set from falling down.

- Make sure the screws are fully tightened to the bracket and display.

VESA 75X75 / VESA 100X100 / VESA 200X100 is supported.

If needed, you may refer to the display's user manual to verify the display has one of the supported VESA formats.

Bracket to attach to

the display

Safety pin







1 2 3 4 5 6 7 8

No comments

LG LSW140B User Manual Page 4