Remote Control
Make the sound clear when the volume is too low. (Dolby
Digital only)
Set Night mode to On to reduce the sound intensity and
improve neness and softness.
Adjusts the volume level appropriately.
Using External device
a
b
Select PORTABLE.
Play the music on the connected external device.
Portable cable (Not included)
c
Using Bluetooth
b
c
Play music on your Bluetooth device.
a
Select Bluetooth function.
LG HS9 (XX:XX)
Enter the PIN code (0000) as needed.
,
e
a
c
Installing cover foot
IR Blaster operation
Installation
b
d
Screws and wall plugs are not supplied.
,
You can extend the height of the unit by using cover foot (height : 11 mm)
Because it is dicult to make a connection after installing this unit, you should connect the cables
before installation.
,
Do not install this unit on Metallic furniture.
,
OPTICAL function is selected directly. If you press this
button again, the function is returned to previous one.
Adjusts sound level of Treble, Bass and Sub-woofer.
Controls playback on Wi-Fi mode.
MUSIC
CINEMA
FLAT
BOOST
TRE/BASS (Treble / Bass)
STANDARD
DIMMER
SLEEP 180
SLEEP 10
OFF
Sound quality may become lower or disconnected depending on the distance, interference or
obstacles.
,
Depending on the type of the device, you may not be able to use the Bluetooth function.
,
Depending on the connected device, this function may not operate.
,
If you turned o the unit directly, it cannot be turned on automatically by AUTO POWER function.
However the unit can be turned on by AUTO POWER function when optical signal comes in after 5
seconds of no signal.
,
After the unit is turned on by AUTO POWER function, it will be automatically turned o if there is no
signal for a certain period of time from the external device connected by an optical cable.
,
Auto power On/Off
This unit automatically turns on and o by an input source : Optical.
Turns on or o AUTO POWER function.
Synchronizes the audio and video. (0 to 300 ms)
Press once.
Press and hold to turn on or o this function.
Using your TV remote control
You can control some functions of this unit by your TV remote control even in other company’s product.
Controllable functions are volume up/down and mute.
Make sure that the sound output of your TV is set to [External speaker].
,
Depending on the remote control, this function may not work well.
,
Supported TV brands
,
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio
ON - AUTO POWER
OFF - AUTO POWER
Screws and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30)
for the mounting.
,
If this unit covers TV Remote sensor, you can
connect and use IR Blaster as show in illustration.
IR BLASTER
Remote sensor of TV
Sensor of IR Blaster
Comments to this Manuals