LG CRD-8360B User Manual download pdf (Page 9)

E-9

MOUNTING

THE

CD-ROM

DRIVE

Step

1.

Turn

off

and

unplug

your

com-

puter

and

all

peripheral

devices

attached

to

it.

Step

2.

Remove

the

cover

from

your

computer.

Step

3.

Remove

the

front

panel

from

an

unused

half-height

slot.

Step

4.

Slide

the

CD-ROM

drive

into

the

half-height

slot,

and

secure

the

drive

in

place

with

screws

and

brackets.

Note:

If

there

is

too

much

space

between

the

sides

of

the

drive

and

the

drive

bay,

you

may

need

to

install

spacer

brackets,

available

at

your

local

computer

store.

Step

5.

Push

the

power

supply

cable

connector

firmly

into

the

power

in

connector.

Figure

6.

Removing

the

Floppy

Disk

Drive

and

the

Blanking

plate

Figure

7.

Mounting

the

Drive

Power

supply

connector

(4-pin

connection

cable)

Figure

8.

Connecting

the

Power

Supply

Cable

GND

Pin

assignment

The

pin

assignment

of

the

power-in

connector

is

as

follows:

12V

DC

5V

DC

CRD-8360

eng

9/20/88

2:23

PM

Page

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 66 67

Comments to this Manuals

No comments