LG B1828C User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
TROUBLESHOOTING 21
ENGLISH
Before requesting service
Please check the following before you contact the service center. If the problem persists, contact
your local service center.
Problem Possible causes Corrective action
The air conditioner
does not work.
The air conditioner is un-
plugged.
Check whether the power cord is plugged into
the outlet.
A fuse is blown or the
power supply is blocked.
Replace the fuse or check if the circuit breaker
has tripped.
A power failure has oc-
curred.
Turn off the air conditioner when a power failure
occurs. When the power is restored, wait 3 min-
utes, and then turn on the air conditioner.
The voltage is too high or
too low.
Check if the circuit breaker has tripped.
The air conditioner
turned off automatically
at a preset time.
Press the power button again.
TROUBLESHOOTING
The air conditioner
does not generate
cool air.
Air is not circulating
properly.
Make sure that there are no curtains, blinds or
furniture blocking the front of the air conditioner.
The air filter is dirty.
Clean the air filter once every 2 weeks. See
“Cleaning Air Filter” for more information.
The room temperature is
too high.
In summer, it may take some time to cool indoor
air. In this case, select the jet cool operation to
cool indoor air quickly.
Cold air is escaping from
the room.
Make sure that no cold air is escaping through
ventilation points in the room.
The desired temperature
is higher than the set
temperature.
Set the desired temperature to a level lower
than the current temperature.
There is a heating source
nearby.
Avoid using a heat generator such as an electric
oven or a gas burner while the air conditioner is
in operation.
Air circulation operation
is selected.
In the air circulation operation, air blows from the
air conditioner without cooling or heating the in-
door air. Switch the operation mode to the cool-
ing operation.
Self-diagnosis function
This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit
will blink in 2 second intervals. If this occurs, contact your local dealer or service center.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments