LG B1828C User Manual download pdf (Page 17)

ADVANCED FUNCTIONS 17

ENGLISH

Forced operation

Operation procedures when the remote con-

trol can't be used. The operation will be

started if the ON/OFF button is pressed.

If you want to stop operation, re-press the

button.

* The feature can be changed according to

type of model.

- For cooling and heating models, the oper-

ation mode changes, depending on the

room temperature.

- For cooling-only models, the temperature

is set to 22°C.

Auto Restart Function

This function is useful in the situation of

power failure.

When power regains after a failure this fea-

ture restore the previous operating condition

and the air conditioner will run in the same

settings.

Room temp. Set temp.

Operation

mode

Below 21°C 24°C

Heating

operation

Above 21°C

And Below 24°C

23°C

Dehumidifying

operation

Above 24°C 22°C

Cooling

operation

NOTE

!

This feature is enabled by factory default

setting, but you can disable it by pressing

the ON/OFF button for 6 seconds. The

unit will beep twice and the indicator

lamp(2) will blink 4 times.

To enable it, press the button again for 6

seconds. The unit will beep twice and the

indicator lamp(1) will blink 4 times.

NOTE

!

Test operation

During the TEST OPERATION, the unit op-

erates in cooling mode at high speed fan,

regardless of room temperature and re-

sets in 18 minutes. During test operation,

if remote controller signal is received, the

unit operates as remote controller sets.

If you want to use this operation, Press

and hold the ON/OFF button for 3~5 sec-

onds, then the buzzer sound 1 "beep".

If you want to stop the operation, re-press

the button.

ON/OFF

button

Panel upward

Open Front

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments