LG LW130W-D User Manual download pdf

INSTALLATION / OPERATION MANUAL

HD Compact Network Camera

Read this manual carefully and observe the guidance provided herein before installing /

operating the device.

Please keep this Installation / Operation Manual for future reference.

MODEL

LW130W

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

FCC WARNING: This equipment may generate or use

radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the

modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is

made.

WARNING

• Do not install this equipment in a confined space

such as a bookcase or similar unit.

• Wiring methods shall be in accordance with the

National Electric Code, ANSI/NFPA 70.

• To reduce a risk of fire or electric shock, do not expose

this product to rain or moisture.

CAUTION

• This installation should be made by a qualified service

person and should conform to all local code.

• The apparatus should not be exposed to water

(dripping of splashing) and no objects filled with

liquids, such as vases, should be placed on the

apparatus.

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it

means the product is covered by the

European Directive 2002/96/EC.

2. All electrical and electronic products

should be disposed of separately

from the municipal waste stream

via designated collection facilities

appointed by the government or the

local authorities.

3. The correct disposal of your old appliance will

help prevent potential negative consequences

for the environment and human health.

4. For more detailed information about disposal

of your old appliance, please contact your city

office, waste disposal service or the shop where

you purchased the product.

EEE Compliance with Directive. (for Turkey only)

To disconnect power from mains, pull out the mains

cord plug. When installing the product, ensure that the

plug is easily accessible.

IMPORTANT SAFETY

INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

EU Conformity Notice

LG Electronics hereby declares that this/these product(s)

is/are in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC,

2004/108/EC, 2006/95/EC and 2009/125/EC

Please contact to the following address for obtaining a

copy of the DoC (Declaration of Conformity).

European Standards Centre:

Krijgsman 1, 1186 DM Amstelveen The Netherlands

Indoor use only.

RF Radiation Exposure Statement

This equipment should be installed and operated with

minimum distance 20 cm between the radiator and your

body.

France Notice

Pour la France métropolitaine

2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage

intérieur

2.400 -2.454 GHz (canaux 1 à 7) autorisé en usage

extérieur

Pour la Guyane et la Réunion

2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage

intérieur

2.420 - 2.4835 GHz (canaux 5 à 13) autorisé en usage

extérieur

Italy Notice

A general authorization is requested for outdoor use in

Italy.

The use of these equipments is regulated by:

1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject

to general authorization) for outdoor use and

article 105 (free use) for indoor use, in both cases

for private use.

2. D.M. 28.5.03, for supply to public of RLAN access to

networks and telecom services.

L’uso degli apparati è regolamentato da:

1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette

ad autorizzazione generale) se utilizzati al di fuori

del proprio fondo e 105 (libero uso) se utilizzati

entro il proprio fondo, in entrambi i casi per uso

private.

2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso

R-LAN alle reti e ai servizi di telecomunicazioni.

FCC Compliance Statement

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

CAUTION : Any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

FCC RF Radiation Exposure Statement : This equipment

complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should

be installed and operated with minimum distance 20

cm between the radiator and your body. End users must

follow the specific operating instructions for satisfying RF

exposure compliance.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

CAUTION: Regulations of the FCC and FAA prohibit

airborne operation of radio-frequency wireless devices

because their signals could interfere with critical aircraft

instruments.

Responsible Party:

LG Electronics USA, Inc.

1000 Sylvan Avenue

Englewood Cliffs, NJ 07632

TEL. : +1-800-243-0000

1. Disconnect the stand from the body.

Turn the nut-cover counterclockwise to remove the cover from the body.

2. Fix the stand.

Detach the stand cover and fix the stand using two screws provided with it.

3. Attach the body of the device on the fixed stand.

Engage the stand with the body of the device and turn the nut-cover clockwise to fix it.

Please check the camera and all of the

accompanying components are included in

the package.

a Body

b Stand

Used to support the camera

body or install it on the ceiling.

c Screws and Plastic Anchors

The screws are necessary to

attach the stand on the ceiling.

The plastic anchors are to be

inserted on the holes where

the screws are applied prior to

the screws in order to enhance

the grip of the screws on the

surface.

d Manual CD

The CD-ROM includes the

installation executables for

the application software and

product manual.

e Installation / Operation

Manual

A summarized, quick reference

guide for installing and using

the camera.

f Adapter and AC Cable

Provides the device with DC 5

V power. This unit must always

be operated with a DC 5 V

Certified/Listed, class 2 power

supply only.

d e f

a Motion Detector

Detects motions occurring in vicinity

of the device.

b Microphone

The sounds coming from the vicinity

of the device is delivered through

this microphone to a connected PC.

c Flash LED

Flash LED lights up the vicinity of

the camera.

d Ethernet Connection Lamp

Turns on in green color when the

ethernet connection to the network

is established.

e Power Lamp

Turns on in green color when the

power supply is on and the device

is running.

f Wireless LAN Connection Lamp

Green light means that the Wireless

LAN connection is successfully

established.

g Ethernet Terminal

Connect the network cable here

h Speaker

The speaker delivers the sounds from

the microphone to the camera.

i WPS, Factory Settings Button

• Press the button for less than

4 seconds to activate WPS

functionality.

• Hold the button for 10 seconds

or longer to activate the

Factory Default Mode.

j Power Socket

Connect a DC 5V power supply

k I/0 Terminals

I/O terminals are used to connect the

camera with a sensor and/or relay

(alarm) devices

l Stand Connecting Hole

You can connect the camera onto a

stand using this hole.

m Micro SD Card Slot Cover / Micro

SD Card Slot

Insert a micro SD card here.

n REBOOT

Push this button to restart the device.

For the initial set-up of the network, take the following steps to

congure your network.

1. Change the PC’s network setting to DHCP.

[Start – Control Panel – Network Connections – Local Area

Connection – Local Area Connection Properties – Internet

Protocol (TCP/IP)]

Click

2. Connect the PC or router to the LG IP camera.

3. Use a power adaptor of the rated electricity configuration to

supply power to the LG IP camera.

4. Turn the LG IP camera on and wait until the green lamp

turns on, which means the booting procedure has been

completed. The Ethernet Lamp will also turn on in a green

color when the network connection is established.

Wireless connection signWired connection sign

5. Install ‘LG IPSOLUTE” software in the provided CD and run IP

Utility.

[Run the ‘IP Utility’]

Run ‘IP Utility’, which will

appear on the desktop

screen after installing ‘LG

IPSOLUTE’.

• PC and LG IP Camera

should be connected

to the same router

before you can use IP

Utility.

[ Screen of IP Utility running ]

6. Click the magnifying glass icon in the top left of IP Utility

to search for LG IP Camera. You can find LG IP Camera

automatically by using IP Utility.

7. Double click the device shown in the search result to access

it through Web Client.

8. When the login window appears, enter the default ID and

password (admin for both) and click the ‘Confirm’ button.

9. Once you log on to the camera, you will see the user

interface screen, where you can use the various features of

the device.

10. To change the network settings, go to Configuration >

Network > TCP/IP If you want to input the IP address directly,

select the IP address status as ‘Statically Set’. If this is the

case, enter the information such as camera IP address,

Subnet mask, Gateway, DNS, etc. to suit the desired network

environment.

Note:

If the Internet service is the dynamic IP address type and the

IP address is automatically received, select ‘Automatically set

with DHCP’.

Product Installation

Device Overview -

Components

Device Overview -

Components and Features

Network Setup -

Wired Network Settings

1 2

Summary of Contents

Page 1 - HD Compact Network Camera

INSTALLATION / OPERATION MANUALHD Compact Network CameraRead this manual carefully and observe the guidance provided herein before installing / operat

Page 2 - Mobile Monitoring

To set up the wireless network, first refer to [Network Setup - Wired Network Setup] and [Network Setup - Prot Forwarding Setup] and follow the proced

Comments to this Manuals

No comments

LG LW130W-D User Manual

Browse online or download User Manual for Supplementary music equipment LG LW130W-D. LG LW130W-D Owner's manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Supplementary music equipment LG LW130W-D