LG LAP340 User Manual download pdf (Page 14)

Operating14

Operating

With wired connection

1. Connect your LG TV to the unit by using an

optical cable. (Refer to the pages 10 - 11.)

2. Set up LG Sound Sync (Optical) on the TV. Refer

to the TV's instruction manual.

3. Turn on the unit by pressing

(Power) on the

remote control.

4. Select OPTICAL function by using OPTICAL on

the remote control.

Green LED on the unit is lit up for about 3

seconds and you can listen to the TV's sound.

With wireless connection

1. Turn on the unit by pressing

(Power) on the

remote control.

2. Select LG TV function by using LG TV on the

remote control. Then white LED on the unit

starts to blink.

3. Set up LG Sound Sync (Wireless) on the TV. Refer

to the TV's instruction manual.

When connection is completed normally

between this unit and your TV, white LED on

the unit is lit up for about 3 seconds.

If you turned o the unit directly by pressing

(Power), LG Sound Sync (Wireless) will be

disconnected. To use this function again, you

should reconnect the TV and the unit.

Note

AUTO POWER On/Off

This function automatically turns on/o the unit

when you turn on/o the TV or the external device

(DVD Player, Blu-ray Disc Player, etc.) connected to

this unit.

It is supported only on OPTICAL and LG TV

functions.

You can turn on or o AUTO POWER function by

using AUTO POWER ON/OFF switch on the rear

panel of the unit.

After the unit is turned on by AUTO POWER

function, it will be automatically turned o if

there is no signal for a certain period of time

from the TV connected by LG Sound Sync

(Optical/Wireless).

After the unit is turned on by AUTO POWER

function, it will be automatically turned o if

there is no signal for a certain period of time

from the external device connected by an

optical cable.

AUTO POWER function is initially turned on.

If you turned o the unit directly, it cannot

be turned on automatically by AUTO POWER

function. However the unit can be turned

on by AUTO POWER function when optical

signal comes in after 5 seconds of no signal.

Depending on the connected device, this

function may not operate.

When booting this unit on LG TV fucntion,

it takes about 25 seconds to turn it on and

the red LED is blinking twice per second.

During that time, you cannot control this

unit except turn it o.

In Bluetooth mode, this unit may be turned

on by AUTO POWER setting depending on

the connected Bluetooth device and then

LG TV function is selected.

In this case the unit will be turned o

automatically and when you restart the unit,

it will be turned on by LG TV function.

Note

LAP340-NB.DSGPLLK_ENG.indd 14 2013-10-10  4:09:10

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

LG LAP340 User Manual Page 14

Comments to this Manuals

Related products and manuals for Soundbar speakers LG LAP340