LG VR6470LVMP User Manual download pdf (Page 33)

CLEANING THE DUST BIN FILTER



week, with a brush or vacuum cleaner.



to the dust bin. Operating the Robot cleaner without the HEPA and sponge filters will

cause the suction motor to malfunction.

Tip

The Dust Bin Filter consists of a HEPA Filter and Sponge Filter.

Clean both the HEPA and Sponge ﬁlters as per the following sequence.

3. Use a cleaning brush to clean the Sponge Filter.

If using water to clean it, allow it to dry

completely in the shade before reﬁtting.

4. Assemble the HEPA and Sponge ﬁlters back

onto the Filter housing as per the following

sequence.

※

Fit the rectangular locator on the HEPA

Filter into the locating slot of the ﬁlter body.

※

Be careful not to incorrectly assemble HEPA

and Sponge Filter onto the Filter housing.

2. Thoroughly clean out the ﬁne dust particles on

the HEPA Filter, with a vacuum cleaner or cleaning

brush.

※

Do NOT wash the HEPA Filter with water.

Its suction power will be reduced.

1. Pull the hook on the left of the HEPA Filter

module on the rear side of Dust Bin to

separate the HEPA Filter and the sponge.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 87 88

No comments

LG VR6470LVMP User Manual Page 33