LG VR6170LVM User Manual download pdf (Page 18)

HOW TO CHARGE THE BATTERY

The Roboking 2.0 returns to the home station at the

end of a cleaning cycle or when its battery is running low.

※

When cleaning is started from the Home-station, Roboking 2.0 will

show better performance in automatic recharge.

(Even in the wide area where the Robot vacuum cleaner cannot see

the signal from Home-station, the Robot will remember the location

if the cleaning is started from the station.

※

In the event that the unit returns to the Home Station due to a low

battery, cleaning will be started, after the charging, from the nearest

place of the area which has not been cleaned before. (Page 17)

※

If Roboking 2.0 is unable to dock to the home station on its ﬁrst

attempt, it will try again until it docks successfully.

※

When Roboking 2.0 completed all areas that it can clean, it will return to the home station even when the

battery level is not low.

※

Roboking 2.0 will automatically return to the home station to recharge when it's left uncharged or without

cleaning order for more than 10 minutes.

※

Do not operate Roboking 2.0 on tables or desks. It may result in an injury or damage to the product when

it starts to search for home station after 10 minutes.

Be sure to turn the power off when placing Roboking 2.0 on high furniture.

※

If the Roboking commenced cleaning whilst away from the home station, and then the Homing button is

pressed from either the remote or the unit, it may take slightly longer to ﬁnd the home station.

※

If the Roboking 2.0 stays within 10 cm (3.9 in) of the front of the charging terminal while the power supply

is turned on, it will automatically be returned to the home station and charging will begin.

Automatic charging

Method 1. Attach the Roboking 2.0 to the home station

by aligning to the front side of the home

station. A melody sound will be generated

along with an audio message to start

charging.

※

If an audio message saying “Turn on the

main power switch on the bottom of the

unit” is generated repeatedly when the

Roboking 2.0 is attached to the home

station, please check the power switch

and turn it on.

Method 2. When the HOMING button of the remote

control or the Roboking 2.0 is pressed, the

charge process will start by announcing the

search for the Home Station and will then

attempt to return to it for charging.

Manual charging

Take the following precautions when using the home station:

• If foreign material is covering the charging terminal, charging may not proceed smoothly.

Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.

• To prevent electric shock, do not touch the charging terminal with any metallic objects.

• To avoid fire or electric shock, never disassemble or modify the home station.

• Do not to place the home station or power plug near to a heating appliance.

Tip

If using the Roboking 2.0 for the ﬁrst time or when charging the battery during cleaning, you can manually

charge the battery.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments

LG VR6170LVM User Manual Page 18

Comments to this Manuals

Related products and manuals for Robotic vacuum cleaners LG VR6170LVM