LG 47WV30BR-B Owner's Manual download pdf (Page 77)

77

ENG

ENGLISH

IR CODES

49. OSD Select (Command: k l)

- To select OSD(On Screen Display) on/off

Transmission

[k][l][ ][Set ID][ ][Data][Cr]

Data

00: OSD off

01: OSD on

Acknowledgement

[l][ ][Set ID][ ][OK/NG][Data][x]

52. S/W Version (Command: f z)

- To read the software version.

Transmission

[f][z][ ][Set ID][ ][Data][Cr]

Data

FF: Data should be always ff in hexadecimal.

Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data][x]

50. Elapsed Time Return (Command: d l)

- To read the panel used time.

Transmission

[d][l][ ][Set ID][ ][Data][Cr]

Data

FF: Data should be always ff in hexadecimal.

Acknowledgement

[l][ ][Set ID][ ][OK/NG][Data][x]

* Returned data means used hours in hexadecimal.

51. Serial No. Check (Command: f y)

- To read the serial numbers.

Transmission

[f][y][ ][Set ID][ ][Data][Cr]

Data

FF: Data should be always ff in hexadecimal.

Acknowledgement

[y][ ][Set ID][ ][OK/NG][Data][x]

48. Key (Command: m c)

- To send IR remote control code.

Transmission

[m][c][ ][Set ID][ ][Data][Cr]

Data

IR_KEY_CODE

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

When display is in the standby mode, display will

turn on by Power button of remote control only.

47. Temperature Value (Command: d n)

- To read the inside temperature of the display.

Transmission

[d][n][ ][Set ID][ ][Data][Cr]

Data

FF: Data should be always ff in hexadecimal.

Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

1 2 ... 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments