LG TU500 User Manual download pdf (Page 22)

Turning your handset on

Ensure that your USIM card is in your handset and

the battery is charged. Press and hold the key

until power is on. Enter the USIM PIN code that was

supplied with your USIM card if PIN code setting is

on. After a few seconds you will be registered on the

network.

Turning your handset off

Press and hold the key until power is off. There

may be a few seconds delay while the handset

powers down.

Do not re-power the handset during this time.

Access codes

You can use the access codes described in this

section to avoid unauthorized use of your phone.

The access codes (except PUK and PUK2 codes) can

be changed by using the Change codes feature

[Menu 9.6.3].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code

protects your USIM card against unauthorized use.

The PIN code is usually supplied with the USIM card.

When the PIN Code Request is set to Enable, your

phone will request the PIN code every time it is

switched on. When the PIN Code Request is set to

Disable, your phone connects to the network directly

without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some USIM cards, is

required to access functions such as Fixed Dial

Number. These functions are only available if

supported by your USIM card.

PUK code (4 to 8 digits)

The PUK (PIN Unblocking Key) code is required to

unlock a blocked PIN code. The PUK code may be

supplied with the USIM card. If not, contact your

network operator’s customer service for the code. If

you lose the code, contact your network operator’s

customer service.

Getting started

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 98 99

No comments

LG TU500 User Manual Page 22