LG GR-F258JTK User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
ABOUT THE AUTOMATIC ICEMAKER
OPERATION INSTRUCTIONS
A newly-installed refrigerator may take
12 to 24 hours to begin making ice.
The icemaker will produce eight cubes per
cycle—approximately 100–130 cubes in a 24-
hour period, depending on freezer compartment
temperature, room temperature, number of door
openings and other operating conditions.
If the refrigerator is used before the water
connection is made to the icemaker, set the
power switch to O (off).
When the refrigerator has been connected to the
water supply, set the power switch to I (on).
The icemaker will fill with water when it cools to
freezing. A newly-installed refrigerator may take
12 to 24 hours to begin making ice cubes.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be stuck
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale, and shrink.
NOTE: If the cube size is smaller or larger than
you expected, you can regulate the size with the
cube size button.
Every time you press the cube size button, the
indicator moves up on light. The higher the light
position, the larger the cubes will be. Pressing at
highest position returns indicator to lowest
position.
WHEN YOU SHOULD SET THE
ICEMAKER POWER SWITCH TO O
(OFF)
• When the water supply will be shut off for
several hours.
• When the ice storage bin is removed for more
than a minute or two.
• When the refrigerator will not be used for
several days.
NORMAL SOUNDS YOU MAY HEAR
• The icemaker water valve will buzz as the
icemaker fills with water. If the power switch is
in the I (on) position, it will buzz even if it has
not yet been hooked up to water. To stop the
buzzing, move the power switch to O (off).
NOTE: Keeping the power switch in the I (on)
position before the water line is connected can
damage the icemaker.
• You will hear the sound of cubes dropping into
the bin and water running in the pipes as the
icemaker refills.
PREPARING FOR VACATION
Set the icemaker power switch to O (off) and
shut off the water supply to the refrigerator.
If the ambient temperature will drop below
freezing, have a qualified servicer drain the water
supply system to prevent serious property
damage due to flooding from ruptured water lines
or connections.
26
Automatic
Shut off Arm
Icemaker
Cube Size
Indicator Light
Cube Size Select
Button
Power Switch
ww
WARNING
Personal Injury Hazard
Avoid contact with the moving parts of the
ejector mechanism, or with the heating
element that releases the cubes. DO NOT
place fingers or hands on the automatic
icemaking mechanism while the refrigerator is
plugged in.
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments