LG GR-F258JTK User Manual download pdf (Page 14)

USING YOUR REFRIGERATOR

ENSURING PROPER AIR

CIRCULATION

In order to ensure proper temperatures, air must

flow between the refrigerator and freezer

sections. As shown in the illustration below, air

enters at top of freezer and circulates down.

From bottom of freezer, air is forced up to top of

refrigerator. Air enters refrigerator through top

vent, then circulates and exists at bottom, where

it returns to freezer.

MULTI-FLOW

• Multi-Flow means powerful and effective cooling

operation. This is especially noticeable when

new food is placed in the refrigerator

compartment.

• If water or foreign substances enter the cool air

vent while cleaning, efficiency will be lowered. In

addition, if gasket is damaged, efficiency may

be lowered because of escaping cool air.

Do not block any of cool air vents with food

packages. If the vents are blocked, airflow will be

interrupted and temperature and moisture

problems may occur.

IMPORTANT: Because air circulates between

both sections, any odors formed in one section

will transfer to the other. You must thoroughly

clean both sections to eliminate odors. To

prevent odor transfer and drying out of food, wrap

or cover foods tightly. (See the Food Storage

Guide section for details.)

SETTING THE CONTROLS

• Your refrigerator has a control pad on the

dispenser that lets you regulate the temperature

in the freezer and refrigerator compartments.

• Initially set the REFRIGERATOR CONTROL at

3°C and the FREEZER CONTROL at –18°C.

Leave it at this setting for 24 hours (one day) to

stabilize. Then adjust the compartment

temperature as desired.

• Refrigerator Temp Control: 0°C to 8°C

The lower the number setting, the colder the

refrigerator compartment will become.

• Freezer Temp Control: -21°C to -13°C

When the setting is at a lower number, the

freezer compartment becomes colder. But the

refrigerator compartment becomes warmer

because less cold air flows into the refrigerator.

NOTE: If you want to off display, press and hold

EXPRESS FRZ key and FREEZER key over 5

seconds at the same time.

NOTE: Touch display once to activate, then

touch again to change the settings or activate a

function. If 10 seconds has passed since the

display has been touched, it will be necessary to

touch “once” again to reactivate.

☞ This is to prevent accidental display setting

changes.

• Express Freezing : Press the EXPRESS FRZ

button and the LED will turn on. This function

will remain activated for 24 hours and increase

the cooling speed of the freezer and the amount

of ice produced.

• Dispenser Lock : Press and hold the LOCK

button for 3 seconds to lock the dispenser.

When it is locked, the LED will be off and the

dispenser will not operate. To unlock, press and

hold the LOCK button for 3 seconds.

• Filter Reset : When the FILTER RESET LED

turns on, you have to change the water filter.

Press the FILTER RESET button for 3 seconds

to turn LED off. You need to change the water

filter approximately every 6 months.

WARNING: If a door is open, the dispenser

does not work.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Comments to this Manuals

No comments

LG GR-F258JTK User Manual Page 14

Comments to this Manuals

Related products and manuals for Fridges LG GR-F258JTK