LG GMM916NSHV User Manual download pdf (Page 16)

INSTALLATION

ENGLISH

Choosing the Proper Location

•

The fridge should always be plugged into its

own individual properly grounded electrical

outlet rated for 230 Volts, 50 Hz, AC only,

and fused at 15 or 20 amperes. This provides

the best performance and also prevents

overloading house wiring circuits which could

cause a fire hazard from overheated wires. It is

recommended that a separate circuit serving

only this appliance be provided.

Unpacking Your Fridge

WARNING

•

Use two or more people to move and install

the fridge. Failure to do so can result in back

or other injury.

•

Your fridge is heavy. When moving the fridge

for cleaning or service, be sure to protect

the floor. Always pull the fridge straight

out when moving it. Do not wiggle or walk

the fridge when trying to move it, as floor

damage could occur. Wind the leveling feet

up first so that the unit is on its rollers.

•

Keep flammable materials and vapors, such

as gasoline, away from the fridge. Failure to

do so can result in fire, explosion, or death.

Remove tape and any temporary labels from your

fridge before using. Do not remove any warning-

type labels, the model and serial number label, or

the Tech Sheet that is located under the front of

the fridge.

To remove any remaining tape or glue, rub the

area briskly with your thumb. Tape or glue residue

can also be easily removed by rubbing a small

amount of liquid dish soap over the adhesive with

your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove

tape or glue. These products can damage the

surface of your fridge.

Fridge shelves are installed in the shipping

position. Please reinstall shelves according to

your individual storage needs.

Flooring

To avoid noise and vibration, the unit must be

leveled and installed on a solidly constructed floor.

If required, adjust the leveling legs to compensate

for unevenness of the floor. The front should be

slightly higher than the rear to aid in door closing.

Leveling legs can be turned easily by tipping the

cabinet slightly. Turn the leveling legs to the left

to raise the unit or to the right to lower it. Poorly

constructed timber flooring can cause a limit in

door adjustment and the cabinet to become out

of shape. (See Leveling and door AlIgnment.)

NOTE

Installing on carpeting, soft tile surfaces, a

platform or weakly supported structure is

not recommended.

WARNING

To reduce the risk of electric shock, do not

install the fridge in a wet or damp area.

Do not install in any outdoor or sheltered

outdoor location or direct sunlight.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments

LG GMM916NSHV User Manual Page 16

Comments to this Manuals

Related products and manuals for Fridges LG GMM916NSHV