LG DLEX5780VE User Manual download pdf (Page 39)

ENGLISH

Special Functions. (cont.)

Energy Saver

This option helps to reduce the energy consumption in

the Normal cycle, depending on the load size.

When the Energy Saver option is selected, the cycle begins

with an air dry section and the drying time is increased.

Custom Program

If you have a special combination of settings that you

use frequently, you can save these settings as a custom

program..

* To save a custom program:

1. Turn on the dryer and turn the cycle selector knob to

select the desired cycle.

2. Use the cycle setting buttons to adjust the settings for

that cycle.

3. Press the cycle option button(s) for the option you

would like to add. A confirmation message will be

shown in the display.

4. Press and hold the Custom Program button for 3

seconds.

To recall a custom program:

1. Turn on the dryer.

2. Press the Custom Program button.

3. Press the Start/Pause button to start the cycle.

Steam Functions

To fill the steam feeder

1. Open the lid.

MAX

Lid

MAX

Water

ONLY

Steam

Feeder

NOTE

You may save only one custom program at a time.

Pressing and holding the Custom Program button will

overwrite any previously saved custom program.

NOTE

The Energy Saver option is turned on by default in the

Normal cycle.

Turn off the Energy Saver option for a faster Normal

cycle which begins with heated drying.

To turn the Energy Saver default off, press and hold

the Wrinkle Care button for three seconds.

ON or OFF appears in the display.

HOW TO USE

2. Lift out the steam feeder.

3. Fill the steam feeder to the MAX line with water.

4. Place the steam feeder in the square barrel, then

cover the lid.

WARNING

• 



Failure to follow this

warning can cause serious injury or death.

•  Failure to

follow this warning can cause serious injury or death.

NOTE

Before using a Steam Cycle, the steam feeder must be filled with

water up to the MAX line. If not, the will be displayed. Make sure

that the steam feeder is filled with water or the drawer is fully

closed. Turn the dryer off then restart the steam cycle.

• Only use water. Do not fill the steam feeder with foreign

substances, rinse agents, or detergents.

• Before moving the dryer, make sure the steam feeder is empty.

• Do not use distilled water; the water level sensor in the steam

generator will not work.

• Be careful to put the Steam Feeder otherwise water will be

overflow.

• Wipe up any spilled water around the Steam Feeder and the

drawer before starting the dryer.

• Do not fill the steam feeder with hot water (over 86°F/30°C).

MFL67731040_en_170712.indd 39 2017.7.12 5:18:36 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 115 116

Comments to this Manuals

No comments

LG DLEX5780VE User Manual Page 39

Comments to this Manuals

Related products and manuals for Electric laundry dryers LG DLEX5780VE