LG DKS-7000 User Manual download pdf (Page 12)

Before Operation

Initial Settings

By using the Setup menu, you can make various adjust-

ments to items such as picture and sound. You can also

set a language for the subtitles and the Setup menu,

among other things. For details on each Setup menu

item, see pages 12 to 15.

To display and exit the Menu:

Press SETUP to display the menu. A second press of

SETUP will take you back to initial screen.

To go to the next level:

Press on the remote control.

To go back to the previous level:

Press on the remote control.

General Operation

Press SETUP.

The setup menu appears.

Use / to select the desired option then

press to move to the second level.

The screen will be shown the current setting for the

selected item, as well as alternate setting(s).

Use / to select the second desired option

then press to move to the third level.

Use

to select the desired setting then

press SELECT/ENTER to confirm your selection.

Some items require additional steps.

Press SETUP or PLAY to exit the setup menu.

LANGUAGE

OSD

Select a language for the Setup menu and on-screen display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track (disc

audio), subtitles, and the disc menu.

Original:

Refers to the original language in which the

disc was recorded.

Other:

To select another language, press number but-

tons to enter the corresponding 4-digit number accord-

ing to the language code list on page 27. If you enter

the wrong language code, press CLEAR on the remote

control.

DISPLAY

TV Aspect

4:3:

Select when a standard 4:3 TV is connected.

16:9: Select when a 16:9 wide TV is connected.

Display Mode

Display Mode setting works only when the TV Aspect

mode is set to “4:3”.

Letterbox: Displays a wide picture with bands on the

upper and lower portions of the screen.

Panscan: Automatically displays the wide picture on

the entire screen and cuts off the portions that do not fit.

Progressive Scan

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the Component Video jacks for connec-

tion to a TV or monitor that is compatible with a pro-

gressive scan signal, set Progressive Scan to On.

To Turn ON progressive scan:

Connect component out of the DVD to the input of your

monitor/television, set your television or monitor to

Component Input.

1. Select “Progressive Scan” on the DISPLAY menu

then press .

2. Select “On” using the / buttons.

3. Press

SELECT/ENTER

to confirm your selection.

The confirm menu will appear.

4. When the confirm menu appears on your screen

Cancel is highlighted as default. Use the /

buttons to highlight Enter.

5. Pressing

“

Enter” will set the player to Progressive

scan mode.

Caution

Once the setting for progressive scan output is entered,

an image will only be visible on a progressive scan

compatible TV or monitor. If you set Progressive Scan

to On in error, you must reset the unit.

1) Remove any disc from the unit and close the disc

tray. See that “NO DISC” is displayed on the display

window

2) Press STOP (

) and hold it for five seconds before

releasing it. The video output will be restored to the

standard setting, and a picture will once again be vis-

ible on a conventional analog TV or monitor.

DVD

OSD

Original

English

Off

Original

Disc Audio

Disc Subtitle

Disc Menu

Move

Select

LANGUAGE

DISPLAY

TV Aspect

Widescreen

16 : 9

Display Mode

OffProgressive Scan

Move

Select

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments

LG DKS-7000 User Manual Page 12

Comments to this Manuals

Related products and manuals for DVD players LG DKS-7000