LG DKS-7000 User Manual download pdf (Page 28)

Troubleshooting / Specifications

General

Power requirements . . . . . . AC 220-240 V , 50/60 Hz

Power consumption . . . . . . . . . . . . . . . . . . . . . 14 W

Dimensions (approx.) .430 X 43 X 260 mm (w x h x d)

Mass (approx.) . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kg

Operating temperature . . . 5˚C to 35˚C (41˚F to 95˚F)

Operating humidity . . . . . . . . . . . . . . . . . 5 % to 90 %

System

Laser . . . . .Semiconductor laser, wavelength 650 nm

Signal system . . . . . . . . . . . . . . . . PAL/NTSC/AUTO

Frequency

response . . . . . . DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio . . . . . . . . . . . More than 100 dB

(ANALOG OUT connector only)

Harmonic distortion . . . . . . . . . . . Less than 0.008 %

Dynamic range . . . . . . . . . . More than 100 dB (DVD)

More than 95 dB (CD)

Outputs

VIDEO OUT . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p 75 Ω,

sync negative, RCA jack x 1

S-VIDEO OUT . . . . . . . . . . . . . . .(Y) 1.0 V (p-p), 75 Ω,

negative sync, Mini DIN 4-pin x 1

COMPONENT

VIDEO OUT . . . . . . . . . . . . . . . .(Y) 1.0 V (p-p), 75 Ω,

negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p),

75 Ω, RCA jack x 2

Audio output (digital audio) . . . . . . . .0.5 V (p-p), 75 Ω,

RCA jack x 1

Audio output (optical audio) . . . . . . . . .3 V (p-p), 75 Ω,

Optical connector x 1

Audio output (analog audio) . . .2.0 Vrms (1 KHz, 0 dB),

600 Ω, RCA jack (L, R) x 1

P/NO : MFL39518823

Check the following guide for the possible cause of a problem before contacting service.

Symptom

No power.

The power is on, but

the DVD player does

not work.

No picture.

No sound.

The DVD player does

not start playback.

The remote control

does not work properly.

Possible Cause

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive DVD sig-

nal output.

• The video cable is not connected

securely.

• The equipment connected with the

audio cable is not set to receive DVD

signal output.

•

The power of the equipment connected

with the audio cable is turned off.

• The AUDIO options are set to the

wrong position.

• An unplayable disc is inserted.

• The rating level is set.

• The remote control is not pointed at

the remote sensor on the DVD player.

• The remote control is too far from the

DVD player.

Correction

• Plug the power cord into the wall outlet

securely.

• Insert a disc. (Check that the DVD or audio

CD indicator in the display

window is lit.)

• Select the appropriate video input mode on

the TV.

• Connect the video cable securely.

• Select the correct input mode of the audio

receiver so you can listen to the sound from

the DVD player.

• Turn on the equipment connected with the

audio cable.

• Set the Digital Audio Output to the

correct position, then turn on the DVD play-

er again by pressing POWER.

• Insert a playable disc. (Check the disc type,

color system, and regional code.)

• Cancel the rating function or change the

rating level.

• Point the remote control at the remote sen-

sor of the DVD player.

• Operate the remote control closer to the

DVD player.

Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby

DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.



Design and specifications are subject to change without notice.

1 2 ... 23 24 25 26 27 28

Comments to this Manuals

No comments

LG DKS-7000 User Manual Page 28

Comments to this Manuals

Related products and manuals for DVD players LG DKS-7000