LG D1451WF User Manual download pdf (Page 26)

2626

To prevent trouble and poor operating, it is important to check filters and spray arms

at regular intervals.

Filters

• Remove the lower rack first.

• Turn the mesh filter counterclockwise.

• Take out the mesh filter, upper STS filter and

outer filter.

• We recommend to clean them and run the Care

cycle without detergent at least once a week.

• Replace them in the reverse order.

Mesh filter

Outer filter

Upper STS

filter

Keeping the dishwasher

• If you are not using the dishwasher for a long

time, run a Care cycle without detergent. When

the cycle is finished, clean the dishwasher

according to the USER MAINTENANCE

INSTRUCTIONS to remove the food debris at

the bottom of the dishwasher and close the door.

Lower Spray Arm

• Check that the water jet holes are not blocked.

• If cleaning is required, remove the arm by

pulling up.

• Clean the spray arm and replace it pulling down.

Upper Spray Arm

• Pull the upper rack forwards.

• Check that the water jet holes are not blocked.

• If cleaning is required, remove the arm by

unscrewing the nut.

• Clean the spray arm and replace it in the

reverse order.

Water Inlet

• A filter is incorporated in the connection of

the valve on the water inlet hose.

If insufficient water flows into the dishwasher,

check that the filter is not blocked.

• Cleaning the filter

- Disconnect the dishwasher

from the mains supply.

Switch off at the mains socket

and remove the plug.

- Turn off the tap.

- Unscrew the inlet hose.

- Remove the filter from

connection.

- Clean the filter in the supply

hose under running water.

- Refit the filter, making sure

it is sitting correctly.

- Reconnect the inlet hose to the tap.

- Turn on the tap.

• If there is a leak, the inlet hose might not be

on securely, or it may have been screwed on

at an angle. Unscrew and reconnect the water

inlet valve correctly.

• Reconnect power supply.

USER MAINTENANCE INSTRUCTIONS

NOTE

•

After each cycle, clean the filter for a better

washing result.

•

Before starting, check that the filter is

assembled well. If the filter is not assembled

correctly, you might have a poor cleaning

result.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments