LG D1451WF User Manual download pdf (Page 9)

1. If the end of drain hose does not fit to the

drain line, use a rubber connector(not

supplied) that is resistant to heat and

detergent.

2. This should be available from a plumbing

shop or DIY merchants.

3. There are two typical connections as shown

in Figure A, B.

The S trap spigot must be drilled out cleanly

and free of obstruction to its maximum

internal diameter, if used for drainage.

To prevent siphoning, one of the following

methods must be used:

When the drain hose is connected to a sink

S trap or waste disposal unit, the hose must

be looped up to the underside of the bench

top and secured.

Drain hose Extension

Extend drain hose as shown below.

Fig. A

When the drain hose is connected to a

separate standpipe, it is essential that an

airtight connection be made.

Refer to Fig.B

Fig. B : Drainage connection - stand pipe.

9

INSTALLATION INSTRUCTIONS

Installation of drain hose

•

When you connect or extend drain hose,

make sure that drain hose is not

kinked.

(Bends should have a 40 mm radius.)

CAUTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments