LG AS40GVSL2 User Manual download pdf (Page 14)

HOW TO USE

ENGLISH

Off Timer operation

It provides quiet room atmosphere while sleeping.

1. Press the button to start Air Purifier operation

2. Press the Off Timer button to select turn off reservation time.

• The reservation time can be set in the order of 2 hours → 4 hours → 8 hours → 12 hour

→ Disable.

Example) When setting 2 hours turn off: the product turns off after operating 2 hours in sleep

mode. Once the Off Timer has been set, only the LED lamp above the Off Timer but-

ton gets lit while the other LED lamps and cleanliness display lamp get turned off.

For sound sleep, air speed is controlled low, and operates automatically after certain

time depending on cleanliness.

If you press the Off Timer button once more when the Off Timer is set, you can

check the setting time and additional functions.

•

Explanation on the Display : PM1.0 density stays at 80

g/m

, representing a bad(orange) level and the

dust particle size display shows PM1.0. Therefore, it is understood to be a higher level than PM10 or

PM2.5 density. In case the Lighting lamp is orange/red even the dust density display is good/normal, the

odor is strong/very strong.

Reference

• PM10 and PM2.5 cleanliness follows the provided by the MEP. (2016)

- The overall cleanliness level displayed on the product may be different from a level announced by MEP.

• The dust density level for PM1.0 has been displayed in the same manner as the dust density level for

PM2.5. (LG Electronics standards)

• The displayed density of PM10 / PM2.5 could differ from the forecast of the MEP and from other measure-

ment devices or products.

- Indicated dust concentration values can differ from each other depending on the differences in dust meas-

uring methods and also from real dust concentration levels.

- The assessment of dust density was made against dust used for LG Electronics standards tests.

• In case you use the product which generates steam and micro particles (humidifier, cooling device, spray,

etc.), micro dust density could change.

• Since the cleanliness display shows overall dust and odor, it could differ from the density value of PM10,

PM2.5, and PM1.0.

• Even in the same space, the PM10 density value could differ from other products due to air circulation.

• The overall cleanliness display could change in response to the chemicals contained in air freshener, per-

fume, deodorizer, and cosmetics.

• The displayed dust density value could change depending on the installation environment (affected by sofa,

bed, carpet, vacuum cleaner, humidity, smoke, bugs, fats, etc.)

• The displayed density value of PM10/PM2.5/PM1.0 could change depending on the surrounding environ-

ment (construction site, road side, plant, etc.)

• The density of micro dust could be measured high near exit doors, windows, and ventilation holes or under

the environment where outside air flows in.

• Do not clean the sensor with other materials other than alcohole or water. It may cause product failure.

※ MEP : Ministry of Environmental Protection the People's Republic of China

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Comments to this Manuals

No comments

LG AS40GVSL2 User Manual Page 14

Comments to this Manuals

Related products and manuals for Air purifiers LG AS40GVSL2