LG AS40GVSL2 User Manual download pdf (Page 23)

TROUBLESHOOTING BEFORE CALLING FOR SERVICE

23

ENGLISH

TROUBLESHOOTING BEFORE CALLING FOR

SERVICE

Symptom Check Actions

It does not start at

all.

•

Isn’t the power plug pulled out?

• Isn’t the voltage too low?

• Insert correctly into the socket.

• Check if it is 220 V~.

Wind amount is

small and there is

a noise.

• Is the pre Filter clogged?

• Is dust accumulated on the pre

Filter?

• Clean the pre Filter.

• Replace the pre Filter.

Air purification

does not work well

• Is the indoor contamination se-

vere?

• Is dust accumulated on the pre

Filter?

• Isn’t the usage place too wide?

• Are there obstacles nearby?

• Is the product installed in a cor-

ner?

• Ventilate first before usage.

• Replace the pre Filter.

•

Use the product appropriate for the usage

area. (Avoid places with fluent ventilation

such as entrance, window, etc.)

• Please remove obstacles.

• Please change the installation location.

There is a strange

odor coming out of

air outlet.

• Is it used at a place with a lot

of smoke or odor?

• The air cleaning function may be de-

graded where there are a lot of smoke

or odor. Please use the Air Purifier

after ventilation.

There is an odor,

but the Indicator

lamp does not

change.

• Isn’t violet light turned on in

the Indicator lamp?

•

Indicator lamp indicates the cleanliness

through the odor sensor. Odor sensor

may not respond to food odor since it is

a sensor detecting contamination gas.

But the odor is removed by the deodor-

ization filter.

The Indicator lamp

is continuously on

with red color.

• Doesn’t the color change even

if it is moved to a clean room?

• Did you use spray near the Air

Purifier?

• If the quantity of odor is greater than

the ability that can be processed by

the Air Purifier, the display may not

change.

• Do not use sprays near the Air Purifier.

Button does not

work well.

• Is the lock lamp on the opera-

tion part turned on?

• Press Off Timer button for 3 sec. to

reset the lock setting.

If there is a problem with the product, check the following cases first before requesting service

to the service center.

1 2 ... 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments