
33
Connecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct instructions.
Before connecting
Ensure that the hose clip is set as indicated here.
Connect the Elbow Hose
Push the elbow hose toward the body of the washing
machine.
Place the Drain Hose
To change the direction of the hose, pull out the elbow
hose and change the direction.Repeat Step 2.
Clip
Non-Pump Model
Pump Model
1
2
3
Note
Firmly insert the free end of the drain hose into the drain opening of your
home. Make sure the soft rubber end is completely inside the drain opening.
• If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses
with the cable tie (ribbed side on inside).
• If your drain is a standpipe, fasten the drain hose to the standpipe with the cable tie provided.
The discharge height should be approximately 0.9~1.2m from the floor.
0.9~1.2m
Cable Tie
Cable Tie
0.9~1.2m
MFL69022757((영)150X210_150X210 15. 12. 22. 오후 3:25 페이지 33
Comments to this Manuals