LG WD-MD8000WM User Manual download pdf (Page 14)

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc.

under the feet). Make sure that all four feet are

stable and resting on the floor and then check

that the appliance is perfectly level (Use a spirit

level).

• Once the appliance is level, tighten the lock

nuts up towards the base of the appliance. All

lock nuts must be tightened.

Raise Lower

Lock nut

Tighten all 4

lock nuts securely

Diagonal Check

• When pushing down the edges of the top

plate diagonally, the appliance should not

move up and down at all (check both

directions). If the appliance rocks when

pushing the machine top plate diagonally,

adjust the feet again.

NOTE

• Timber or suspended type flooring may

contribute to excessive vibration and

unbalance.

• If the washing machine is installed on a raised

platform, it must be securely fastened in order

to eliminate the risk of falling off.

Connecting the Water Supply

Hose

• Water pressure must be between 0.1 MPa

and 1.0 MPa (1.0‒10.0 kgf/cm

• Do not strip or crossthread when connecting

supply hose to the valve.

• If the water pressure is more than 1.0 MPa, a

decompression device should be installed.

• Periodically check the condition of the hose

and replace the hose if necessary.

Checking the Rubber Seal on the

Water Supply Hose

Two rubber seals are supplied with the water

inlet hoses. They are used for preventing water

leaks. Make sure the connection to taps is

sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

LG WD-MD8000WM User Manual Page 14

Comments to this Manuals

Related products and manuals for Washing machines LG WD-MD8000WM