LG F1612DBGE User Manual download pdf (Page 39)

38

EN

Symptoms Reason Solution

Washing machine

does not start

Electrical power cord may not be

plugged in or connection may be

loose.

• Make sure plug fits tightly in wall outlet.

House fuse blown, circuit breaker

tripped,or a power outage has

occurred.

• Reset circuit breaker or replace fuse.

Do not increase fuse capacity. If

problem is a circuit overload, have it

corrected by a qualified electrician.

Water supply tap is not turned on. • Turn on water supply tap.

Washing machine

will not spin

Check that the door is firmly shut.

• Close the door and press the Start/

Pause button. After pressing the

Start/Pause button, it may take a few

moments before the washing machine

begins to spin. The door must be locked

before spin can be achieved. Add 1

or 2 similar items to help balance the

load. Rearrange load to allow proper

spinning.

Door does not

open

Once washing machine has started,

the door cannot be opened for safety

reasons.

• Check if the ‘Door Lock’ icon is

illuminated. You can safely open the

door after the ‘Door Lock’ icon turns off.

Wash cycle time

delayed

If an imbalance is detected or if the

suds removing programme is on, the

wash time will increase.

• This is normal. The time remaining

shown in the display is only an

estimate. Actual time may vary.

Fabric softener

overflow

Too much softener may cause an

overflow.

• Follow softener guidelines to ensure

appropriate amount is used. Do not

exceed the maximum fill line.

Softeners

dispensed too

early

Too much softener may cause an

premature dispensing.

• Follow the guidelines provided by the

detergent manufacturer.

• Close the dispenser drawer slowly. Do

not open the drawer during the wash

cycle.

Dry problem Check water supply tap.

• Do not overload. Check that the

washing machine is draining properly to

extract adequate water from the load.

Clothes load is too small to tumble

properly. Add a few towels.

• Turn off water supply tap.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

Comments to this Manuals

No comments