LG F1056QD User Manual

10nstallationI Level adjustmentConcrete floorsWooden floors (Suspended floors)1. Adjusting the washing machine level properly prevents excessiveno

11are before washingC1. Care LabelsLook for a care label on your clothes. This will tell you about the fabric content of your garment andhow it should

12dding detergentA• Main wash only ➔• Pre Wash + Main Wash ➔• Do not exceed the maximum fill line.Close the dispenser drawer slowly.Overfilling can ca

13dding detergentA• The detergent should be used according to theinstruction of the detergent manufacture.• If too much detergent is used, too many su

14unctionFThe wool wash cycle of this machine has been approved by Woolmark for the washing of machinewashable Woolmark products provided that the pro

16ow to use washerH(1) Dial : Program(2) Button : Start / Pause(3) Button : Spin(4) Button : Temperature(5) Button : Power(6) Button : Medic Rinse(7)

2roduct FeaturesPontentsCWarnings...3Specifications...

22aintenanceM The water inlet filter- " " error message will blink on the control panel when water does not enter thedetergent dr

24aintenanceM Dispenser drawer❋ After a while detergents and fabric softeners leave a deposit in the drawer.• It should be cleaned from time to time w

25aintenanceM Cleaning your washer1. ExteriorProper care of your washer can extend its life.The outside of the machine can be cleaned with warm water

26roubleshooting guide❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at anearly stage and react a

27Washer does not startWasher will not spinDoor does not openWash cycle timedelayed• Electrical power cord may notbe plugged in or connectionmay be lo

28roubleshooting guideSymptom Possible Cause SolutionT• Water supply is not adequate in area.• Water supply taps are not completely open.• Water inlet

29erms of WarrantyTWhat Is Not Covered:• Service trips to your home to teach you how to use the product. • If the product is connected to any voltage

3arningsWFor your safety, the information in this manual must be followed to minimizethe risk of fire or explosion, electric shock, or to prevent prop

30emoM

Name : Front loading washing machinePower supply : 220V~,50Hz / 230V~,50Hz / 240V~,50Hz )W(mm006 : eziS550mm(D) 850mm(H)Weight/Max.Watt : 63kg /

5nstallationI1. To prevent internal damage duringtransport, the special 4 bolts arelocked. Before operating the washer,remove the bolts along with the

6nstallationILaundryTubWasherapprox.2cmDrain HoseLevel floor :Allowable slope under entire washer is 1˚Power outlet :Must be within 1.5 meters of eith

7nstallationIHot water tapColdHot(option)Cold water tapWater supply pressure must be between 100kPa and 1000kPa(1.0~10kgf/cm2)Don’t strip or crossthre

8nstallationI Normal Tap without thread & screw type inlet hoseNormal Tap without thread & one touch type inlet hose (Single inlet models)1.

9nstallationI Installation of drain hose• The drain hose should not be placedhigher than 100 cm above the floor.• Proper securing of the drain hose w